Count onTetric® plus
Tetric® plus Bulk Fill in Alberta.
- 5cavity classes
- 4shades
- 3seconds curing
- 2viscosities
- 1universal composite
Making People Smile
Your composite shouldn’t be one of your challenges
Tetric® plus is our new simplified universal composite. It meets all your requirements for a high-quality universal composite while offering greater efficiency and simplicity.
With just four shades and layers of up to 4 mm2, Tetric plus delivers the same trusted performance as conventional composites — meeting every requirement, with handling that more than 90% of dentists rated as “very good” or “good”1. Easy shade selection and consistent curing times facilitate your treatment workflow, so you can save time and money.
Esthetics
- •Just four shades cover all 16 VITA* classical shades and Bleach
- •Pronounced chameleon effect blends almost seamlessly with the surrounding tooth
- •Enamel-like translucency after curing makes it suitable for the anterior region
- •Quickly polishes to a brilliant, long-lasting high-gloss finish
Quality
- •High flexural strength4 (133 MPa) and compressive strength (375 MPa) for high strength
- •Reliable curing4 of layers up to 4 mm in thickness, ensuring strength and longevity
- •Low shrinkage stress for a reduced risk of marginal gaps
- •High radiopacity4 (>200% Al) for easy diagnostics, with low wear and low water absorption
Efficiency
- •Layers of up to 4 mm reduce the number of increments needed
- •Consistent, short curing times starting from 3 seconds6
- •Four shades for all cavity classes mean fewer orders, less stock and fewer expired products
Why Tetric® plus
- ✓One universal composite for all five cavity classes
- ✓Just four shades cover all 16 VITA* classical shades and Bleach
- ✓Layers of up to 4 mm2 for fewer increments and higher efficiency
- ✓Curing times from 3 seconds6 for a faster workflow
- ✓Two viscosities — sculptable Fill and flowable Flow
- ✓Low shrinkage stress for reliable, esthetic results
Top quality down the line
Tetric® plus meets all the criteria essential for high-quality restorations.
Effective Shrinkage Compensation Technology
A patented chain controller combined with a low-elasticity filler minimizes both volumetric shrinkage and shrinkage stress, with reliable performance in 4-mm increments.
Optimized 4-Filler Technology
Spherical and non-spherical fillers provide smooth, easy handling and quickly polish to a brilliant, long-lasting high-gloss finish.
New, Improved Cannulas
Redesigned internal geometry eliminates air bubbles for smooth dispensing — 0.9 mm for precise placement and 1.2 mm for efficient bulk application up to 4 mm.
of dentists rated the handling as “very good” or “good”1
give excellent ratings for shade matching3
reported high satisfaction with the cushioning effect5
Making People Smile
Esthetics for five cavity classes
Two viscosities are all you need for an efficient restorative workflow across cavity classes I, II, III, IV and V — in layers of up to 4 mm2, with esthetics that are also suitable for the anterior region.
Tetric® plus for Bulk Fill
Select a product below to view details and specifications — tap or click to switch.
Tetric® plus Fill
Sculptable viscosity for all five cavity classes
/images/products/tetric-plus-fill.jpgTetric plus Fill is the sculptable viscosity of our simplified universal composite. Its sculptable consistency adapts well to cavity walls while staying stable when handled, so you can build anatomical structures with confidence. With layers of up to 4 mm2 and just four shades for all cavity classes, it combines high-quality restorations with greater efficiency and simplicity.
Esthetics – Quality – Efficiency
- •Sculptable viscosity that adapts well to cavity walls
- •Reliable curing in increments of up to 4 mm2 in thickness
- •More than 90% of dentists rated the handling as “very good” or “good”1
- •92% of dentists reported high satisfaction with the cushioning effect5
- •Optimized 4-filler technology for easy handling and quick polishing
- •Viscosity can be lowered by warming the syringe to up to 68 °C if desired
Can Tetric plus Fill be warmed up?
Yes. You can safely heat Tetric plus Fill in a dental composite warmer to up to 68 °C to achieve a lower viscosity. The mechanical properties will not be affected.
- Type
- Sculptable universal composite
- Cavity classes
- I, II, III, IV, V
- Maximum layer thickness
- 4 mm2
- Shades
- A2, A3, A3.5 and Bleach plus
See Tetric® plus in person
Tetric® plus Fill
Tetric® plus FlowCuring & light exposureCount on Tetric® plus
Click here to go to the online shopReferences
* Cavity classes I-V according to G. V. Black
- Internal study based on over 170 participants. More than 90% of participants rated the handling as “very good” or “good”.
- Apply the shade A3.5 plus with a maximum layer thickness of 3.5 mm and light cure for 3 s or 5 s.
- Internal study based on over 170 participants. 81% rated the shade matching as “exact” or “strong”.
- According to ISO 4049.
- Internal study based on over 170 participants. 92% reported experiencing “no” or “hardly noticeable deformations”.
- With Bluephase® PowerCure in the 3sCure mode (light intensity of 2,700–3,300 mW/cm²). Only suitable for Class I and II restorations in the posterior region, light cured from the occlusal aspect.
- For load-bearing restorations, apply a covering layer of a sculptable composite.
- Compared to competitors.