Count onTetric® plus

Tetric® plus Low Shrinkage Composite in Sudbury, Ontario.

5cavity classes
4shades
3seconds curing
2viscosities
1universal composite

Making People Smile

Your composite shouldn’t be one of your challenges

Tetric® plus is our new simplified universal composite. It meets all your requirements for a high-quality universal composite while offering greater efficiency and simplicity.

With just four shades and layers of up to 4 mm², Tetric plus delivers the same trusted performance as conventional composites — meeting every requirement, with handling that more than 90% of dentists rated as “very good” or “good”¹. Easy shade selection and consistent curing times facilitate your treatment workflow, so you can save time and money.

Esthetics

•Just four shades cover all 16 VITA* classical shades and Bleach
•Pronounced chameleon effect blends almost seamlessly with the surrounding tooth
•Enamel-like translucency after curing makes it suitable for the anterior region
•Quickly polishes to a brilliant, long-lasting high-gloss finish

Quality

•High flexural strength⁴ (133 MPa) and compressive strength (375 MPa) for high strength
•Reliable curing⁴ of layers up to 4 mm in thickness, ensuring strength and longevity
•Low shrinkage stress for a reduced risk of marginal gaps
•High radiopacity⁴ (>200% Al) for easy diagnostics, with low wear and low water absorption

Efficiency

•Layers of up to 4 mm reduce the number of increments needed
•Consistent, short curing times starting from 3 seconds⁶
•Four shades for all cavity classes mean fewer orders, less stock and fewer expired products

Why Tetric® plus

✓One universal composite for all five cavity classes
✓Just four shades cover all 16 VITA* classical shades and Bleach
✓Layers of up to 4 mm² for fewer increments and higher efficiency
✓Curing times from 3 seconds⁶ for a faster workflow
✓Two viscosities — sculptable Fill and flowable Flow
✓Low shrinkage stress for reliable, esthetic results

Top quality down the line

Tetric® plus meets all the criteria essential for high-quality restorations.

Effective Shrinkage Compensation Technology

A patented chain controller combined with a low-elasticity filler minimizes both volumetric shrinkage and shrinkage stress, with reliable performance in 4-mm increments.

Optimized 4-Filler Technology

Spherical and non-spherical fillers provide smooth, easy handling and quickly polish to a brilliant, long-lasting high-gloss finish.

New, Improved Cannulas

Redesigned internal geometry eliminates air bubbles for smooth dispensing — 0.9 mm for precise placement and 1.2 mm for efficient bulk application up to 4 mm.

90%

of dentists rated the handling as “very good” or “good”¹

80%

give excellent ratings for shade matching³

92%

reported high satisfaction with the cushioning effect⁵

Learn more

Making People Smile

Esthetics for five cavity classes

Two viscosities are all you need for an efficient restorative workflow across cavity classes I, II, III, IV and V — in layers of up to 4 mm², with esthetics that are also suitable for the anterior region.

Tetric plus Fill and Tetric plus Flow for Class I–V restorations

Tetric® plus for Low Shrinkage Composite

Select a product below to view details and specifications — tap or click to switch.

Tetric® plus Fill

Sculptable viscosity for all five cavity classes

Tetric plus Fill is the sculptable viscosity of our simplified universal composite. Its sculptable consistency adapts well to cavity walls while staying stable when handled, so you can build anatomical structures with confidence. With layers of up to 4 mm² and just four shades for all cavity classes, it combines high-quality restorations with greater efficiency and simplicity.

Esthetics – Quality – Efficiency

•Sculptable viscosity that adapts well to cavity walls
•Reliable curing in increments of up to 4 mm² in thickness
•More than 90% of dentists rated the handling as “very good” or “good”¹
•92% of dentists reported high satisfaction with the cushioning effect⁵
•Optimized 4-filler technology for easy handling and quick polishing
•Viscosity can be lowered by warming the syringe to up to 68 °C if desired

Can Tetric plus Fill be warmed up?

Yes. You can safely heat Tetric plus Fill in a dental composite warmer to up to 68 °C to achieve a lower viscosity. The mechanical properties will not be affected.

Type: Sculptable universal composite
Cavity classes: I, II, III, IV, V
Maximum layer thickness: 4 mm²
Shades: A2, A3, A3.5 and Bleach plus

Try it Today

See Tetric® plus in person

Request an in-office demo and see Tetric® plus in action

First name *Last name *Company Name *Email *Job Title *Phone NumberAddress *City *Choose your State/ Province *Post code *Country *Choose the product you want to demo

I've read and understood the General Terms of Use.I would like to receive newsletters from Ivoclar and agree to the Marketing Terms of use.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Count on Tetric® plus

Click here to go to the online shop

* Cavity classes I-V according to G. V. Black

Internal study based on over 170 participants. More than 90% of participants rated the handling as “very good” or “good”.
Apply the shade A3.5 plus with a maximum layer thickness of 3.5 mm and light cure for 3 s or 5 s.
Internal study based on over 170 participants. 81% rated the shade matching as “exact” or “strong”.
According to ISO 4049.
Internal study based on over 170 participants. 92% reported experiencing “no” or “hardly noticeable deformations”.
With Bluephase® PowerCure in the 3sCure mode (light intensity of 2,700–3,300 mW/cm²). Only suitable for Class I and II restorations in the posterior region, light cured from the occlusal aspect.
For load-bearing restorations, apply a covering layer of a sculptable composite.
Compared to competitors.